
ECM-LX800D
44 ECM-LX800D User’s Manual
3.5.2.4 First/Second/Third/Other Boot Device
The BIOS attempts to load the operating system from the devices in the sequence selected
in these items.
3.5.2.5 Boot Up NumLock Status
Select power on state for NumLock.
3.5.2.6 Gate A20 Option
Select if chipset or keyboard controller should control Gate A20.
A pin in the keyboard controller controls Gate A20
Lets chipset control Gate A20
3.5.2.7 Typematic Rate Setting
Key strokes repeat at a rate determined by the keyboard controller. When enabled, the
typematic rate and typematic delay can be selected.
Enable typematic rate/delay setting
Disable typematic rate/delay setting
3.5.2.8 Typematic Rate (Chars/Sec)
Select “Enabled” of Typematic Rate then set the rate at which a character keeps repeating
while holding down a key.
The choices: 6,8,10,12,15,20,24,30
3.5.2.9 Typematic Delay (Msec)
Select “Enabled” of Typematic Rate then set the length of delay before keying strokes to
repeat.
The choices: 250, 500, 750, 1000
3.5.2.10 Security Option
To allow selecting whether the password is required every time the system boots or only
when you enter the Setup.
Require password when entering the main CMOS Setup Utility Screen only.
Require password every time the system boots
Comentarios a estos manuales